unisonic technologies co., ltd utc4013 preliminary cmos ic www.unisonic.com.tw 1 of 5 copyright ? 2011 unisonic technologies co., ltd qw-r502-543.c daul d-type flip-flop ? description the utc4013 is a dual d-type flip-flop which has two independent circuits and each flip-flop features independent data, set, reset, and clock inputs and outputs. the input level applied to data input are transferred to q and q output by rising edge of the clock pulse. when set input is ?h?, and reset input is ?l?, outputs become q=?h? and q =?l?. when set input is ?l? and reset input is ?h?, outputs become q=?l? and q =?h?. when both set input and reset input are at ?h?, outputs become q=?h? and q =?h?. ? features * power supply voltage 3v to 18v * maximum input current of 1u a at 18v over full package temperature * maximum quiescent supply current is 4 a ? ordering information ordering number lead free halogen free package packing utc4013l-s14-r utc4013g-s14-r sop-14 tape reel UTC4013L-P14-R utc4013g-p14-r tssop-14 tape reel
utc4013 preliminary cmos ic unisonic technologies co., ltd 2 of 5 www.unisonic.com.tw qw-r502-543.c ? pin configuration q 1 q 1 ck 1 data 1 set 1 reset 1 v ss v dd q 2 q 2 ck 2 data 2 set 2 reset 2 1 2 3 4 5 6 7 14 13 12 11 10 9 8 ? function table inputs outputs reset set data ck * qn+1 q n+1 l h - - h l h l - - l h h h - - h h l l l l h l l h h l l l - no change no change note: - : don?t care * : level change ? logic diagram ? block diagram
utc4013 preliminary cmos ic unisonic technologies co., ltd 3 of 5 www.unisonic.com.tw qw-r502-543.c ? absolute maximum rating ( t a =25 c , unless otherwise specified) parameter symbol ratings unit dc supply voltage v dd v ss -0.5 to v ss +20 v input voltage v in v ss -0.5 to v dd +0.5 v output voltage v out v ss -0.5 to v dd +0.5 v dc input current i in 10 ma power dissipation p d 500 mw operation temperature t opr -40 ~ +85 storage temperature t stg -65 ~ +150 note: absolute maximum ratings are those values be yond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device operation is not implied. ? recommended operating conditions (v ss =0,t a =25 ) parameter symbol ratings unit dc supply voltage v dd 3 ~ 18 v input voltage v in 0 ~ v dd v ? d.c. characteristics (v ss =0, t a =25 ) parameter symbol test conditions min typ max unit v out =0.5v, 4.5v;v dd =5v, O i out O <1 a 3.5 2.75 v out =1.0v, 9.0v; v dd =10v, O i out O <1 a 7.0 5.5 high v ih v out =1.5v, 13.5v; v dd =15v, O i out O <1 a 11.0 8.25 v out =0.5v, 4.5v; v dd =5v, O i out O <1 a 2.25 1.5 v out =1.0v, 9.0v; v dd =10v, O i out O <1 a 4.50 3.0 input voltage low v il v out =1.5v, 13.5v; v dd =15v, O i out O <1 a 6.75 4.0 v v in =v ss , v dd ; O i out O <1 a; v dd =5v 4.95 5.00 v in =v ss , v dd ; O i out O <1 a; v dd =10v 9.95 10.00 high v oh v in =v ss , v dd ; O i out O <1 a; v dd =15v 14.95 15.00 v in =v ss , v dd ; O i out O <1 a; v dd =5v 0.00 0.05 v in =v ss , v dd ; O i out O <1 a; v dd =10v 0.00 0.05 output voltage low v ol v in =v ss , v dd ; O i out O <1 a; v dd =15v 0.00 0.05 v high i ih v ih =18v, v dd =18v 10 -5 0.1 input current low i il v il =0v, v dd =18v -10 -5 -0.1 ua v oh = 4.6, v in =v ss , v dd ; v dd =5v -0.51 -1.0 v oh = 2.5, v in =v ss , v dd ; v dd =5v -2.10 -4.0 v oh = 9.5, v in =v ss , v dd ; v dd =10v -1.30 -2.2 high i oh v oh = 13.5, v in =v s s, v dd ; v dd =15v -3.40 -9.0 v ol = 0.4, v in =v ss , v dd ; v dd =5v 0.51 1.2 v ol = 0.5, v in =v ss , v dd ; v dd =10v 1.30 3.2 output current low i ol v ol = 1.5, v in =v ss , v dd ; v dd =15v 3.40 12.0 ma v in =v ss , v dd (note); v dd =5v 0.002 1 v in =v ss, v dd (note); v dd =10v 0.004 2 quiescent supply current i dd v in =v ss , v dd (note); v dd =15v 0.008 4 ua note: all valid input combinations.
utc4013 preliminary cmos ic unisonic technologies co., ltd 4 of 5 www.unisonic.com.tw qw-r502-543.c ? a.c. characteristics (v ss =0, t a =25 , c l =50pf) parameter symbol test conditions min typ max unit vdd=5v 70 200 vdd=10v 35 100 low to high t tlh vdd=15v 30 80 vdd=5v 70 200 vdd=10v 35 100 output transition time high to low t thl vdd=15v 30 80 vdd=5v 130 300 vdd=10v 65 130 propagation delay time (ck ? q, q ) t plh t phl vdd=15v 50 90 vdd=5v 110 300 vdd=10v 50 130 t plh vdd=15v 40 90 vdd=5v 110 300 vdd=10v 50 130 propagation delay time (set, reset ? q, q ) t phl vdd=15v 40 90 ns vdd=5v 3.5 8.0 vdd=10v 8.0 16.0 max. clock frequency f cl vdd=15v 12.0 20.0 mhz vdd=5v vdd=10v max. clock input rise time t r cl vdd=15v no limit s vdd=5v vdd=10v max. clock input fall time t f cl vdd=15v no limit s vdd=5v 60 180 vdd=10v 30 80 min. pulse width (set, reset) t w vdd=15v 25 50 vdd=5v 60 140 vdd=10v 30 60 min. clock pulse width t w vdd=15v 25 40 ns vdd=5v 40 vdd=10v 20 min. set-up time (data - ck) t su vdd=15v 15 vdd=5v 20 40 vdd=10v 10 20 min. hold time (data-ck) t h vdd=15v 6 15 vdd=5v 40 vdd=10v 20 min. removal time (set, reset-ck) t rem vdd=15v 15 ns input capacitance c in 5 7.5 pf
utc4013 preliminary cmos ic unisonic technologies co., ltd 5 of 5 www.unisonic.com.tw qw-r502-543.c ? parameter measurement information set reset q t plh 50% 50% t phl 20ns 50% 50% 50% t w 10% 90% 90% 10% 20ns 10% 90% 20ns 20ns 10% 90% 50% t w 2. set-reset, q utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
